Using Epson Remote!
To make changes to the default settings with Epson Remote!,
follow these steps:
1.
2.
3.
4.
5.
6.
7.
8.
Change to the directory you specified, for example:
C:\EPREMOTE\.
Type
PANEL (C:\EPREMOTE\PANEL),
and press
Enter.
You’ll see the printer settings that can be changed while the
printer is on, for example, the bin selection and print directian.
Change the desired settings.
Press
F1 to
save the
settings. (The settings
are then sent to the
printer.)
Press
F2 to
leave the menu.
Type
PRNSET (C:\EPREMOTE\PRNSET),
and press
Enter.
You’ll see the printer’s default settings, which are described in
“Changing the Default Settings” in Chapter 3.
Change the desired settings.
Press
F1
to save your settings and
F2
to leave the menu.
Setting Up the Printer
1-19
To Next Page
Loading...
Need help?
General
