4.
While aligning the paper’s left and right edges with the edge
guides, insert the paper firmly until it meets resistance. After a
few seconds, the printer loads the paper to the loading
position. You are now ready to print.
Note:
Always close the printer cover before printing. The printer stops printing
when the cover is open.
Caution:
Do not use the knob on the right side of the printer except to clear
paper jams when the printer is off. Otherwise, you may damage
the printer or cause it to lose the top-of-form position.
If the platen turns but the printer doesn’t load the paper,
completely remove the paper and re-insert it more firmly.
To eject the paper, press the
Load/Eject
button.
Paper Handling 2-7
To Next Page
Loading...
Need help?
General
