EPSON Perfection V10/V100 Photo/V200 Photo/V350 Photo Revision B
DISASSEMBLY/ASSEMBLY Overview 31
4.1 Overview
This chapter explains the procedures for disassembling the major units and parts of the
product. Unless otherwise explained, reassembly should be carried out in the reverse
order of the disassembly procedure. When you have to remove any units or
components that are not described in this chapter, refer to the exploded diagram in the
Appendix.
Before starting disassembly, always read the precautions described in the next section.
4.1.1 Precautions
Before starting the disassembly or reassembly of the product, always read the
following precautions given under the headings “WARNING” and “CAUTION”.
4.1.2 Recommended Tools
To protect this product from damage, use the specified tools indicated in the following
table
4.1.3 Screws
The following table indicate the screws used in the EPSON Perfection V10/V100 Photo/
V200 Photo/V350 Photo.
W A R N I N G
Before disassembling or reassembling this product, always
disconnect the Power Cable and Interface Cable. However,
when you have to work with power ON for voltage
measurement, etc., use extreme care not to get an electric shock
and do the work in accordance with the procedure given in this
manual.
To prevent your hands from being cut by sharp edges, always
wear gloves before starting disassembly/reassembly.
When touching any internal components, use a static electricity
discharger such as anti-static wrist straps, and handle them
carefully to protect the microprocessors and circuits.
C A U T I O N
Provide sufficient work space for disassembling and
reassembling.
Always use only the recommended tools for disassembly,
reassembly and adjustment.
Use the specified grease for lubrication. (Refer to Chapter 6
MAINTENANCE(P.58) for details.)
When using compressed air products; such as air duster, for
cleaning during repair and maintenance, the use of such
products containing flammable gas is prohibited.
Table 4-1. Recommended Tools
Tool Name Supplier Part Number
Phillips screwdriver No. 2 EPSON 1080532
Flat-blade screwdriver EPSON 1080527
Tweezers EPSON 1080561
Table 4-2. Abbreviations of Screws
Abbreviation
Part Name
C.B.S
Phillips Bind S-tite Screw
C.B.P
Phillips Bind P-tite Screw
C.C.P
Phillips Cup P-tite Screw
Table 4-3. Used Screw List
No. Standard Outline
1 C.B.S 3x5
2 C.B.P 3x8
3 C.C.P. 3x8
To Next Page
Loading...
Need help?
General
Weight and Dimensions
