Setting Up the Projector 19
Connecting to Video Equipment
You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■ If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a
Component Video Source” on page 21.
■ If you’re using a coax video cable, see “Connecting a Composite
Video Source” on page 20.
■ If your video player has an RGB video port (either a single
connector for a VGA monitor cable or three connectors labeled
R/G/B), see “Connecting an RGB Video Source” on page 22.
BNC connector
(component or
composite video)
VGA connector
(RGB video)
To Next Page
Loading...
Need help?
General