Setting Up the Projector 23
Connecting Using a BNC Cable
1. Locate a BNC video cable (one may be included with your video
equipment).
2. Connect the cable between your player and the corresponding
R/G/B connectors on the projector.
3. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB (see page 59).
4. When you’ve finished making any connections, see page 23 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Turning the Projector On and Off
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 28).
To Next Page
Loading...
Need help?
General