78 Maintaining the Projector
3. Place your finger into the groove and remove the air filter as
shown.
4. Insert the new air filter into the holes in the cover, then press it
firmly into place.
5. Slide the air filter cover in until it clicks into place.
Replacing the Lamp
The life span of the projection lamp is about 2000 hours if Power
Consumption
in the Settings menu is set to Normal (default), and
3000 hours if
Power Consumption is set to ECO.
See page 82 to check the lamp usage.
note
The air filter contains
Polypropylene. Dispose of
used air filters properly in
accordance with your local
regulations.
note
Turn off this product when
not in use to prolong the life
of the projector.
Do not turn the projector on
immediately after turning it
off. Turning the projector on
and off frequently may
shorten the life of the lamp.
To Next Page
Loading...
Need help?
General