Epson PowerLite 4100 User Guide

50 Using the Projector on a Network
display the IP address of the projector. Do not enter leading
zeroes.
3. Press
Enter, or, if you set a Web control password in the
projector’s Network menu, enter the user name
EPSONWEB and
your password, then press
Enter.
4. Select one of the menu options listed on the screen, then change
any of the settings as needed. These settings correspond to those
found in the projector’s menu system.
You cannot change the following settings using a web browser:
■ Quick Corner, Pointer Shape, Test Pattern, or User
Button
in the Settings menu
■ User’s Logo, High Altitude Mode, BNC Sync
Termination
, Remote Control Type, and Language in the
Extended menu
■ Any settings in the Reset menu
■ Any settings related to the Power On Protect, User’s Logo
Protect
, or Network Protect passwords
You can only change the following settings using a web browser:
■ Community Name
■ Monitor password
Using Web Remote Control
When you access the projector through your browser, you can display
a “virtual remote control” on your computer screen. This lets you
change sources and perform many of the same functions as you can
with the physical remote control.

Epson PowerLite 4100 Specifications

General

Brand	Epson
Model	PowerLite 4100
Category	Projector
Language	English