Maintaining the Projector 83
3. Install two AA alkaline batteries,
inserting the
+ and – ends as
shown.
4. Position the cover as shown, then
press down until it snaps into
place.
Transporting the Projector
The projector contains many glass and precision parts. Follow these
guidelines to prevent damage:
■ If you are moving the projector by hand, use the projector handle.
■ Attach the lens cover to the lens.
■ Return the projector feet to their stored (highest) positions.
Additionally, follow these guidelines when you are transporting the
projector a long distance:
■ Turn the vertical lens shift dial so that the lens is in its lowest
position.
■ When packing the projector, use the original packaging material if
possible, including the protective lens pads. If you do not have the
original packaging, use equivalent materials, placing plenty of
cushioning around the projector to protect it from shock.
note
Epson shall not be liable for
any damages incurred
during transportation.
To Next Page
Loading...
Need help?
General