Epson PowerLite 4100 User Guide

Using the Projector on a Network 45
5. Choose Wired LAN and press Enter. You see the following
screen:
6. Do one of the following:
■ If your network assigns addresses automatically, turn on the
DHCP setting.
■ If your network does not assign addresses automatically, turn
off
DHCP and enter the projector’s IP Address, Subnet
Mask
, and Gateway Address.
To enter numbers, use the pointer button on the remote
control to highlight the number you want to input, then press
the
Enter button.
7. Press
Menu to exit.

Epson PowerLite 4100 Specifications

General

Brand	Epson
Model	PowerLite 4100
Category	Projector
Language	English