Fine-Tuning the Projector 61
■ Pointer Shape
Lets you choose from three pointer shapes. See page 39 for more
information.
■ Power Consumption
Lets you select from two levels of brightness. The ECO setting
reduces power consumption and noise, and extends the lamp’s
operating life.
■ Remote Receiver
Deactivates the projector’s front and/or back sensors that detect
signals from the remote control. Use this setting to prevent use of
the remote control or to stop interference from bright fluorescent
lights.
■ User Button
You can assign one of the following six menus to the User
button:
Power Consumption, Info, Progressive, Test
Pattern
, Multi-screen, or Resolution. By pressing the button,
the assigned menu item selection/adjustment screen is displayed,
allowing you to make one-touch settings/adjustments.
■ Test Pattern
Displays a test pattern for use when adjusting the zoom, focus,
image position,
Color Mode, Brightness, Sharpness (standard
only),
Abs. Color Temp, Color Adjustment, and when
performing keystone correction.
Press the pointer button on the remote control to the left or
right or press the
Enter button on the projector to change the test
pattern. Press the
Esc button to clear the test pattern.
To Next Page
Loading...
Need help?
General