Epson RC700-A User Manual

Maintenance 9. Troubleshooting
178 RC700 / RC700-A Rev.23
No. Message Remedy Note 1 Note 2
1054
Cannot execute in TEST mode
except from TP.
-
1055
Cannot execute the Background
Task.
Confirm that no background task is
running.
Rebuild the project.
1056 Cannot execute from OP. Enable the TP3 input.
1057
Cannot execute when TP3 enabled
except from the TP3.
The command cannot be executed
from other consoles when TP3 is
enabled.
1058
Cannot execute excluding T2
mode.
Switch to <Teach/T2> key.
1059 Cannot change to T2 mode.
T2 mode cannot be used on
RC700-A Controllers complying with
UL standards.
1100 File failure. Cannot access the file.
1. Reboot the controller.
2. Reinstall the firmware.
3. Replace the CF.
1102
File failure. Read and write failure
of the registry
1. Reboot the controller.
2. Replace the CF.
1103
File is not found.
Check whether the file exists.
1104
Project file was not found.
Rebuild the project.
1105
Object file was not found.
Rebuild the project.
1106
Point files were not found.
Rebuild the project.
1107
The program is using a feature that
is not supported by the current
controller firmware version.
Check the compiler version in the
EPSON RC+
7.0-[Project]-[Properties]-[Compiler].
1108
One or more source files are
updated. Please build the project.
Rebuild the project.
1109 Not enough storage capacity.
Increase free space of the USB
memory.
1110
File is not found.
-
1111
Conveyor file was not found.
-
1112
Force files were not found.
Rebuild the project.
Rebuild the project.
1114
Cannot create the project in the
controller.
There is a possibility that the folder is
full or the project name is duplicated.
Check it by the application selection.
1120
File failure.
Setting file is corrupt.
Restore the controller configuration.
1121
File failure.
Project file is corrupt.
Rebuild the project.
1122
File failure.
Point file is corrupt.
Rebuild the project.
1123
File failure.
I/O label file is corrupt.
Rebuild the project.
1124
File failure.
User error file is corrupt.
Rebuild the project.
1126
File failure.
Software option information is
corrupt.
1. Reboot the controller.
2. Reinstall the firmware.
3. Reconfigure the option.
1127
File failure.
Vision file is corrupt.
Rebuild the project.

Epson RC700-A Specifications

General

Brand	Epson
Model	RC700-A
Category	Controller
Language	English