Maintenance 9. Troubleshooting
RC700 / RC700-A Rev.23 179
1128
File failure.
Backup information file is corrupt.
The specified backup information
cannot be restored.
Acquire the backup information
again, and then restore the file.
1130
Error message failure.
No item is found in the error history.
No error history exists.
Reboot the controller.
1131 Cannot access the USB memory.
Insert the USB memory properly.
When this error still occurs after the
USB memory is inserted properly, the
memory may be unrecognizable to
controller. Insert another memory to
1132
File failure.
Failed to copy the file.
-
1133
File failure.
Failed to delete the file.
-
1134
File failure.
GUI Builder file is corrupt.
Rebuild the project.
1138
File failure. Force Guide file is
Rebuild the project.
1140
File failure.
Failed to open the object file.
Rebuild the project.
1141
File failure.
Failed to open the project file.
Rebuild the project.
1142
File failure.
Failed to read the project file.
Rebuild the project.
1143
File failure.
Failed to open the condition save
file.
1. Retry using the same USB
memory.
2. Retry using another USB
memory.
3. Retry after rebooting the
1144
File failure.
Failed to write the condition save
file.
1. Retry using the same USB
memory.
2. Retry using another USB
memory.
3. Retry after rebooting the
1145
File failure.
Failed to open the conveyor file.
Rebuild the project.
1146
File failure.
Failed to read the conveyor file.
Rebuild the project.
1150
File failure.
Error history is invalid.
1. Reboot the controller.
1151
File failure.
Failed to map the error history.
1. Reboot the controller.
2. Replace the CF.
1152
File failure.
Failed to open the error history file.
1. Reboot the controller.
2. Replace the CF.
1153
File failure.
Failed to write the error history file.
1. Reboot the controller.
1155
File failure.
Failed to open the settings file.
Restore the controller configuration.
1156
File failure.
Failed to save the settings file.
Restore the controller configuration.
1157
File failure.
Failed to read the settings file.
Restore the controller configuration.