Epson RC700-A User Manual

Maintenance 9. Troubleshooting
RC700 / RC700-A Rev.23 181
No.
Message
Remedy
Note 1
Note 2
1250
User Outputs failure.
The Name is empty.
-
1251
User Outputs failure.
The Condition is empty.
-
1252
User Outputs failure.
Robot number is out of the
available range.
-
1260
Alarm Setting failure.
Robot does not exist.
-
1261
Alarm Setting failure.
Failed to get the expiration date.
-
1262
Alarm Setting failure.
Failed to set the alarm.
-
1263
Alarm Setting failure.
Specified alarm number is out of
the allowable range.
-
1264
Alarm Setting failure.
Specified alarm number is not
enabled.
-
1290
Force monitor number is out of the
allowable range.
Reboot the controller.
Reboot the controller.
Initialize the controller firmware.
Replace the controller.
1291
The force monitor is already used
on another device.
Close the force monitor on another
device, and then run the force
monitor.
Check whether another PC is using
the force monitor.
1292
Failed to set/load information of FG
sequence and object.
1400
Force Guide file error.
1401
Invalid Force Guide file path.
1402
Failed to open Force Guide file.
1403
Do not open Force Guide file.
1404
Invalid Force Guide sequence
number.
1405
Invalid Force Guide object number.
1406
Invalid Force Guide sequence
property.
1407
Invalid Force Guide object
property.
1408
Invalid Force Guide object type.
1409
Invalid parameter.
1410
Invalid Force Guide file version.
1411
Force Guide Incorrect property is
existing.
Confirm the property.
Confirm the Force Guide property.
1412
Cannot set Decision object to top of
Force Guide sequence.
Confirm Force Guide sequence.
Cannot set Decision object to top of a
sequence.
Confirm Force Guide sequence.
1413
Specified Force Guide object as
ConditionObject is disabled.
Confirm the settings.
Confirm the settings of Force Guide
object.
1420
Failed to convert program.
Execute rebuild.

Epson RC700-A Specifications

General

Brand	Epson
Model	RC700-A
Category	Controller
Language	English