Troubleshooting Page 122
P
SBA
When all the lights flash, your printer may have an internal error.
Turn off the printer by pressing the
P
power button; wait several
seconds; then turn it on again. If this does not clear the error
condition, contact EPSON as described in the Introduction.
PSBA
When all the lights are off, the printer is not receiving power. Try
these solutions:
◗ Make sure the printer is turned on.
◗ Turn off the power and plug the power cord into the outlet
again.
◗ Plug a lamp into the outlet to make sure the outlet is working.
Also, make sure the outlet isn’t controlled by a switch or
timer.
To Next Page
Loading...
