Troubleshooting Page 126
◗ If you have vertical misalignment, run the Print Head Alignment
utility (see Aligning the Print Head for instructions) or turn off
High Speed mode.
Try the solutions listed above before trying these solutions to
specific print quality problems.
The printed image has horizontal banding
Possible cause Solution
The printable side of
the paper is face
down.
Remove the paper and reload it with the printable side face up. See
Media Loading and Handling Guidelines
for instructions.
The
MicroWeave
option is not set.
Turn on
MicroWeave
in the Advanced dialog box. See Customizing
Print Quality and Special Effects for more information.
The ink nozzles are
clogged.
Run the Head Cleaning utility to clear any clogged ink nozzles. See
Using the Head Cleaning Utility
.
The
Maximum
Printable Area
setting
in your printer
software is turned on.
When the
Maximum Printable Area
setting is turned on, banding may
occur in the expanded area. Deselect this setting on the Paper tab in
your printer software.
To Next Page
Loading...
Need help?
General