Advanced Printing Page 46
You see one of the following dialog boxes:
4 Windows 95, Windows 98, or Windows NT
Type a name (up to 24 characters) for your custom paper size
in the Paper Size Name field. Then select a Paper Width and
Paper Height for the paper. When you’re finished, click Save.
The paper size name appears in the Paper Size list. Add more
sizes if you want, and click OK when you’re done.
Windows 3.1
You can create only one User Defined paper size. Type the
width in the Paper Width field and the length in the Paper
Height field. Then click OK.
5 You see the Paper tab again. The paper size name you defined
is added to the Paper Size list and selected as the current
setting. (In Windows 3.1, the setting is named User Defined.)
Windows 3.1
Windows 95, 98, NT
Note:
In Windows 95, 98,
and NT, the Paper
Width and Paper
Height units are in
hundredth of an
inch (or centimeter)
increments. For
example, 850
equals 8.50 inches.
To Next Page
Loading...
Need help?
General