Advanced Printing Page 56
4 To load a custom watermark you’ve created as a bitmap in an
application program, click the User Defined button. You see
the following dialog box:
Click the Browse button. You see the Select a bitmap File
dialog box. Navigate to the folder containing the bitmap file you
want to use, select the file, and click OK. The path to your
bitmap file appears in the File Name field.
Type a name for the custom watermark (up to 19 characters
long) in the Watermark field. Click the Save button to add it to
the list, then click OK.
The custom watermark now appears as the selected watermark
in the Watermark Settings dialog box and is shown in the
Layout graphic.
Click
Browse to select your
bitmap file
Then type a name for your
custom watermark here
and click Save
Note:
You can create up
to 10 custom
watermarks. In
Windows 95 and
Windows 98, you can
use any bitmap file up
to 15MB in size. With
Windows NT, the file
can be any size.
To delete a custom
watermark you’ve
added to the list, click
the User Defined
button. Then select
the watermark and
click Delete. Click OK
to close the dialog
box.
To Next Page
Loading...
Need help?
General