Advanced Printing Page 57
5 Select the way you want the watermark to appear by choosing
the following options. The on-screen graphic changes to reflect
all the settings you choose.
◗ Position selects where you want the watermark to appear
on your page: Center, Top-Left, Top-Center, Top-Right,
Left, Right, Bottom-Left, Bottom-Center, or
Bottom-Right.
◗ Size adjusts the size of the watermark, either larger or
smaller, as you move the slide bar.
◗ Color lets you choose a color for your predefined
watermark: Red, Black, Blue, Aqua, Lime, Fuchsia, or
Yellow. You cannot select a color for a custom watermark;
it is printed in its original colors.
◗ Intensity sets the lightness or darkness of the watermark
(from 5% to 100%) based on where you move the slide bar.
6 Click OK to accept the settings and return to the Layout dialog
box.
7 If you’re finished changing Layout options, click OK to close
the Layout dialog box. Your changes are applied to the current
print job.
If you want to save your settings as a group to use with future
print jobs, continue with Saving Custom Settings.
Note:
If your monitor
displays only 16
colors, the Intensity
adjustments are not
shown in the Layout
graphic. If you choose
the No Halftoning
setting, the Intensity
setting does not
determine how your
watermark is printed.
To Next Page
Loading...
Need help?
General