Epson Stylus CX4300 - 4.3 Printer Section Disassembly

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450 Revision A
DISASSEMBLY/ASSEMBLY Printer Section 65
4.3 Printer Section
4.3.1 Paper Support Assy.
 Part/Unit that should be removed before removing Paper Support Assy.
None
 Removal Procedure
1. Release the Paper Support Assy. from the guide pins (x2) of the Lower Case, and
remove the Paper Support Assy. from the Lower Case.
Figure 4-3. Removing Paper Support Assy.
4.3.2 Stacker Assy.
 Part/Unit that should be removed before removing Stacker Assy.
None
 Removal Procedure
1. Open the Stacker Assy.
2. Press in the white pin on the left with a precision screwdriver or a similar tool to
release the left side of the Stacker Assy. Then remove the Stacker Assy. pulling
out its pin on the right from the Lower Case.
Figure 4-4. Removing Stacker Assy.
Guide Pins
Paper Support Assy.
Lower Case
Left side
Press in the
white pin
Right side
Stacker Assy.