Name: Epson Stylus CX4300
Brand: Epson
Rating: 5 (1 reviews)

To Next Page

To Previous Page

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450 Revision A

DISASSEMBLY/ASSEMBLY Disassembling Printer Mechanism 90

4.6.10 LD Roller/ASF Unit

 Part/Unit that should be removed before removing LD Roller/ASF Unit

Document Cover / ASF Cover / Support Arm / Scanner Unit / Middle Case /

Panel Unit / Printer Mechanism / Hopper / Main Board / Main Frame / EJ Frame

Assy. / Print Head / CR Scale / CR Motor / CR Unit / Timing Belt / Ink System

 Removal procedure

 Preparation for LD Roller Removal

1. Rotate the LD Roller until the flat part faces upwards.

2. Insert a tweezer or a screwdriver into the slot as shown in the figure to hold

the Paper Back Lever outwards.

3. Move the Carriage Lock Lever outwards.

Figure 4-78. Preparation (1)

 LD Roller Removal

4. Release the tabs (x2) of the LD Roller shaft from the bearing, and loosen the

shaft.

Figure 4-79. Removing LD Roller (1)

5. Pull out the LD Roller shaft from the frame of the ASF Unit and remove the

LD Roller.

Figure 4-80. Removing LD Roller (2)

Tweezer

Carriage

Lock Lever

Flat part

LD Roller

Paper Back Lever

Carriage

Lock Lever

C A U T I O N

Be cautious of the following points.

 Do not touch the LD Roller with bare hands.

 Do not touch the roller of ASF Unit with bare hands.

Tabs

LD Roller

Frame of ASF Unit

LD Roller

Questions and Answers:

Need help?

Do you have a question about the Epson Stylus CX4300 and is the answer not in the manual?

Epson Stylus CX4300 Specifications

General