Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
SC-P400 Series Adjustment 226
17.
Place the color chart on the backing board as shown in
Figure 9-16
and set the
scanning ruler, and then click [OK]. (Use Premium Glossy Photo Paper instead
if no backing board is available.) i1Pro2 is used for explanation in the
following figures.
Figure 9-16. Color chart setting
Figure 9-17. Preparation for calibration
Align the edge of scale with the first
row of the calibration patches.
Place the chart with the nozzle
check pattern to the right.
Measurement start point
Measuring direction
To Next Page
Loading...
