Epson Stylus Pro 9900 - Page 224

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 224
Confidential
10. Release the cables from the clamp. See Figure 4-41.
11. Remove the two screws that secure the Front Cover Sensor L.
A) Black, Phillips, Bind P-tite M3x10: two pieces
12. Remove the Front Cover Sensor L while drawing out the harness from the hole on
the Main Frame.
Figure 4-41. Removing the Front Cover Sensor L
B
Clamp
- Front left -
Front Cover Sensor L
Front Cover Sensor L
Hole