Epson Stylus Pro 9900 - Page 254

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 254
Confidential
4.4.5.4 Roller Release HP Sensor
1. Open the Front Cover (Middle).
2. Disengage the hooks the secure the Roller Release HP Sensor, and remove the
Roller Release HP Sensor.
3. Disconnect the connector from the Roller Release HP Sensor.
Figure 4-89. Removing the Roller Release HP Sensor
Roller Release HP Sensor
- Left (inside) -
Connector
Hook