Epson Stylus Pro 9900 - Page 273

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 273
Confidential
14. Remove the Ink Selector.
15. Attach the hook on the rear of the Ink Selector onto the Main Frame to secure the
Ink Selector. See Figure 4-120.
Figure 4-119. Removing the Ink Selector
Figure 4-120. Securing the Ink Selector to the main body (1)
Figure 4-121. Securing the Ink Selector to the main body (2)
C A U T I O N
After secure the Ink Selector, make sure to place a sheet of paper
below it to catch the spilling remaining ink.
Ink Selector
Ink Selector
Hooks
Sheet
Ink Selector