11
Chapter 1 Product Overview
1
Product Overview
This chapter describes features and specifications of the product.
Features
Printing
• Printing on liner-free label paper
• High speed receipt printing (170 mm/s maximum).
• Supports the maximum paper width of 80 mm, and paper width of 40 mm or 58 mm by using the roll
paper guide*
∗ For 65* model, paper width of 80/40mm only supported
Handling
• Horizontal and vertical installation layouts are selectable.
• Easy drop-in paper loading
• Cable connectors can be stored inside the printer.
68* model only
• Paper taken sensor can detect that issued label is taken before issuing the next paper.
• The back-feed function has enabled top margin scaling.
Software
• Command protocol is based on the ESC/POS Proprietary Command System.
• Various layouts are available by using the page mode.
• A maintenance counter function is supported.
Environment
• Paper reduction function is available.
Others
• The interface is selectable.
• A built-in USB interface is also available.
To Next Page
Loading...
