63
Chapter 5 Handling
5
Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
1
Press the cover open lever to open the roll paper cover.
2
Remove the used roll paper core, if any.
CAUTION
• Do not open the roll paper cover while printing or autocutting.
The printer may be damaged.
• Do not touch the manual cutter with your hands when installing or replacing the
roll paper.
Doing so may injure your hand or finger.
• Use roll paper that meets the printer specification. For details about paper
specification, see "Paper Specifications" on page 83.
•
Do not use a roll paper whose end is pasted to the paper core.
To Next Page
Loading...
