29
Chapter 2 Setup
2
Connecting the AC Adapter
For the AC adapter, use PS-180 or the equivalent.
Use the AC cable supplied with the product.
AC Adapter Connection Procedure
1
Make sure the printer is turned off.
2
Remove the cover on the rear side of the printer.
3
Connect the DC cable of the AC adapter to the power supply connector (stamped DC 24V).
WARNING
• Use of an unspecified AC adapter may cause fire or electrical shock.
• Should a fault ever occur, immediately turn off the power to the printer and unplug
the AC cable from the wall socket.
To Next Page
Loading...
