51
Chapter 3 Advanced Usage
3
NV Graphics Information Print Mode
Prints the following NV graphics information registered to the printer.
• Capacity of the NV graphics
• Used capacity of the NV graphics
• Unused capacity of the NV graphics
• Number of NV graphics that are registered
• Key code, number of dots in X direction, number of dots in Y direction to be defined.
• NV graphics data
Follow the procedures below.
1
After running a self-test, hold down the Feed button for at least one second to enter the Mode
selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
After briefly (less than one second) pressing the Feed button once, hold it down for at least one
second, to print the NV graphics information.
After information printing, the Mode selection guidance is printed again.
3
To finish, turn off the power, or select “Exit and Reboot Printer”.
For details on NV graphics, see "NV Graphics Memory" on page 21.
To Next Page
Loading...
