19
Chapter 1   Product Overview
1
*
: When the memory switch 8-8 is set to ON (Roll paper cover open while the printer is printing: recoverable error)
Unrecoverable Errors
The printer cannot print when an unrecoverable error occurs. If the error persists after turning the printer 
off and then on again, the printer may be defective. Contact qualified service personnel.
Autocutter error The Autocutter 
does not work 
correctly.
 
Recovers when the 
jammed paper or 
foreign matter is 
removed and the roll 
paper cover is closed, 
and then the error 
recovery command is 
executed or the power 
is turned on again.
The error recovery command is valid only if a recoverable error (excluding automatically 
recoverable errors) occurs.
CAUTION
Turn off the power immediately when an unrecoverable error occurs.
Error Error description Error LED flash code
R/W error in memory After R/W checking, the printer does not 
work correctly.
High voltage error The power supply voltage is extremely 
high.
Low voltage error The power supply voltage is extremely 
low.
CPU execution error The CPU is executing an incorrect 
address.
Internal circuit 
connection error
Internal circuits are not connected 
correctly.
Error Error description Error LED flash code Condition for Recovery
LED OFF
LED ON
Approx. 320 ms
Approx. 5120 ms
LED OFF
LED ON
Approx. 320 ms
Approx. 5120 ms
LED OFF
LED ON
Approx. 320 ms
Approx. 5120 ms
LED OFF
LED ON
Approx. 320 ms
Approx. 5120 ms
LED OFF
LED ON
Approx. 320 ms
Approx. 5120 ms
LED OFF
LED ON
Approx. 5120 ms