Epson TM-T88 Series User Manual

37
Chapter 3 Advanced Usage
3
Advanced Usage
Software Settings
With the functions such as the memory switches and customized values, which are software settings for
this printer, you can set the various functions.
For an outline of the functions, see the following pages. Use the software setting mode or the memory
switch setting utility for setting the functions.
• In the software setting mode, panel operations on the printer are used to configure
settings. For details about the panel operations, see "Software Setting Mode" on page 52.
•
For information about how to use the memory switch setting utility, see the User's Manual
for the memory switch setting utility.
• For information about ESC/POS commands, see the ESC/POS Command Reference.
• To check the setting status, use the self-test ("Self-test Mode" on page 50) or the memory
s
witch setting utility.
Item/Method
Software Setting
Mode
Memory Switch
Setting Utility
Memory Switches
1
Transmission of the power ON information
✔✔
Capacity of receive buffer
✔✔
Condition for BUSY
✔✔
Data receive error
✔
Automatic line feed
✔✔
2 Autocutter operation
✔✔
6
Autocutting position
✔✔
Auto scaling for 40/58 mm width paper
✔✔
Auto top margin scaling
✔✔
Selection of the characters per line for 80 mm
width paper
✔✔
Selection of paper width
✔✔
8
Enable left or right margin of bar code print
Roll paper cover open during operation

Epson TM-T88 Series Specifications

General

Print Method	Thermal line printing
Interfaces	USB, Serial, Ethernet
Auto Cutter	Yes
Paper Width	80 mm / 58 mm (with paper width guide)
Power Supply	Internal (some models may use external)