Epson TM-T88 Series User Manual

25
Chapter 2 Setup
2
Changing the Paper Width
Install/remove the roll paper guide according to the roll paper width to be used.
The width of the installed roll paper guide differs according to the model by factory default.
❏ 65* model
Equipped with the 40 mm roll paper guide.
• When using 40 mm width roll paper, use this guide.
• When using 80 mm width roll paper, remove the installed guide.
❏ 66*/67*/68* models
Equipped with the 58 mm roll paper guide.
• When using 58 mm width roll paper, use this guide.
• When using 80 mm width roll paper, remove the installed guide.
• When using 40 mm width roll paper, remove the installed guide and install the guide for 40 mm paper supplied with the
product.
• Because some parts of the print head and the autocutter blade may contact the platen and
become worn out, you cannot change a smaller paper width to a larger one once you start
using the product.
• The printable area is automatically defined by detecting the installed roll paper guide.
However, to change the paper width from 58 mm to 40 mm, using the memory switch is
required. ("Memory Switch 6" on page 40)

Epson TM-T88 Series Specifications

General

Print Method	Thermal line printing
Interfaces	USB, Serial, Ethernet
Auto Cutter	Yes
Paper Width	80 mm / 58 mm (with paper width guide)
Power Supply	Internal (some models may use external)