Epson TM-T88 Series User Manual

54
Starting Hexadecimal Dumping Mode
In the hexadecimal dumping mode, the printer prints the data transmitted from a host device in
hexadecimal numbers and their corresponding characters. It enables you to check if data is transmitted to
the printer correctly.
Follow the procedures below.
1
Open the roll paper cover.
2
While pressing the Feed button in the printer, turn on the printer.
3
Close the roll paper cover.
The printer starts printing data received from then on in hexadecimal numbers and their corresponding ASCII
characters.
Example of printing in hexadecimal dumping mode
• If there is no character corresponding to print data, “.” is printed.
• If you press the Feed button when there is less than one line of print data, one line is
printed.
• During hexadecimal dumping mode, applications that check the printer status may
not operate correctly. The printer only returns the status for the “Real-time
transmission status” command.
Feed button
Hexadecimal Dump
To terminate hexadecimal dump,
press FEED button three times.
1B 21 00 1B 26 02 40 40 1B 69 .!..&.@@.i
1B 25 01 1B 63 34 00 1B 30 31 .%..c4..01
41 42 43 44 45 46 47 48 49 4A ABCDEFGHIJ
*** completed ***
. ! . . & . @ @ . i
. % . . c 4 . . 0 1
ABCDEFGHIJ

Epson TM-T88 Series Specifications

General

Print Method	Thermal line printing
Interfaces	USB, Serial, Ethernet
Auto Cutter	Yes
Paper Width	80 mm / 58 mm (with paper width guide)
Power Supply	Internal (some models may use external)