Epson TM-T88 Series User Manual

30
4
Remove any of the knockouts (at 3 locations) on the rear cover and pass the cable through.
5
Close the rear cover.
6
Connect the AC cable to the AC adapter.
7
Connect the AC cable to the power outlet.
Before disconnecting the DC cable of the AC adapter from the printer, make sure that the
AC cable is disconnected. Then, hold the arrow part of the connector and pull out the
cable while keeping it straight.
Arrow part of connector

Epson TM-T88 Series Specifications

General

Print Method	Thermal line printing
Interfaces	USB, Serial, Ethernet
Auto Cutter	Yes
Paper Width	80 mm / 58 mm (with paper width guide)
Power Supply	Internal (some models may use external)