80
MSW 6-8: ON (58 mm/80 mm)
When using 58 mm width roll paper, received print data is automatically compressed in the vertical and
horizontal directions.
Font A
*1: The print area is 68.25 mm {2.69”} and 552 dots.
Receipt print data Print data to be scaled down by
auto scaling
Compatible
mode
Specified
character size
Print area:
72.0 mm {2.83”}
Printed characters:
576 dots
Print area:
52.5 mm {2.07”}
Printed characters:
420 dots
MSW
6-4
MSW
6-5
TM-T88 series
compatible
mode (1)
ON ON Actual size Characters per line: 42
*1
Character font: 10 × 24
Characters per line: 42
Double width/
Double height
Characters per line: 21
*1
Character font: 20 × 48
Characters per line: 21
(n × width) ×
(m × height)
(double width/
double height
excluded)
Characters per line:
552 dots ÷ (10 × n)
The remainder is
rounded down.
*1
Character font:
(10 × n) × (24 × m)
Characters per line:
420 dots ÷ (10 × n)
The remainder is rounded down.
TM-T88 series
compatible
mode (2)
ON OFF Actual size Characters per line: 44 Character font: 10 × 24
Characters per line: 42
Double width/
Double height
Characters per line: 22 Character font: 20 × 48
Characters per line: 21
(n × width) ×
(m × height)
(double width/
double height
excluded)
Characters per line:
576 dots ÷ (10 × n)
The remainder is
rounded down.
Character font:
(10 × n) × (24 × m)
Characters per line:
420 dots ÷ (10 × n)
The remainder is rounded down.
TM-L90
compatible
mode
OFF OFF Actual size Characters per line: 48 Character font: 10 × 24
Characters per line: 42
Double width/
Double height
Characters per line: 24 Character font: 20 × 48
Characters per line: 21
(n × width) ×
(m × height)
(double width/
double height
excluded)
Characters per line:
576 dots ÷ (10×n)
The remainder is
rounded down.
Character font:
(10 × n) × (24 × m)
Characters per line:
420 dots ÷ (10 × n)
The remainder is rounded down.
To Next Page
Loading...
