Epson TM-T88 Series User Manual

98
Pattern D
Autocutting is performed at the black mark position.
Top margin
When the stop position for autocutting is set to a specific stop
position:
Approx. 24 mm {0.94”} when using 40 mm width liner-free
label paper
Approx. 26 mm {1.02”} when using 80 mm width liner-free
label paper
When the stop position for autocutting is set to an arbitrary stop
position
14 mm {0.55”}
Top margin
When the stop position for autocutting is set to a specific stop
position:
Approx. 24 mm {0.94”} when using 40 mm width liner-free
label paper
Approx. 26 mm {1.02”} when using 80 mm width liner-free
label paper
When the stop position for autocutting is set to an arbitrary stop
position
14 mm {0.55”}
When auto top margin scaling is enabled, the
top margin is r
educed automatically.
Bottom margin = User-defined value + 0 to 25.4
mm {0 to 1”}
* To ensure cutting at the top edge of the black
mark, the printer automatically feeds the paper to
the autocut position, and performs autocutting.
Specified autocutting
position
Actual autocut position
When the printer receives
print data for 3 labels
continuously
Specified autocutting
position
Actual autocut position
Specified autocutting
position
Actual autocut position
Print on the first label
Print on the second
label
Print on the third
label
Print on the first label
(Next sheet)

Epson TM-T88 Series Specifications

General

Print Method	Thermal line printing
Interfaces	USB, Serial, Ethernet
Auto Cutter	Yes
Paper Width	80 mm / 58 mm (with paper width guide)
Power Supply	Internal (some models may use external)