100
Easy Setup
Easy Setup is a function that enables setting of EPSON TMNet WebConfig just by inserting a USB
memory in TM-i and turning the power on.
If you are using a network-connected TM printer, you can make the network settings at the same
time with Easy Setup.
For detail, refer to “TM-i series Easy Setup Gui
de”.
Checking/Updating TM-i Firmware
Checking the TM-i Firmware Version
•Use "Software" in the status sheet (page 54)
•Use "General" in EPSON TMNet WebConfig (page 70)
Updating TM-i Firmware
You can use the TM-i Firmware Update Tool to do the update.
For detail, see "Software" on page 68.
-WebConfig
-IP address
USB Memory
Web contents file
setting.ini file
To Next Page
Loading...
