Epson TM-T88V-i

55
Chapter 2 Setup
2
Initializing the Network Setting
When network connection fails, follow the steps below to initialize the network setting to the
default.
For TM-i firmware Ver.3 or later, the EPSON TMNet WebConfig password is also initialized.
1
Load the paper on the product and turn on the product.
2
Push and hold the push button for 10 seconds or longer. 
The following initialization start message is printed.
Press the push button with a thin object such as a tweezers.
3
20 to 25 seconds later, the following message is printed, and a status sheet is
printed out.
Other settings such as device ID, style sheet, and Server Direct Print settings are not initialized.
Do not turn off the power until the initialization is completed.
Resetting to Network Setting!
Please Wait...
Push button
Reset to Network Setting Finished!