Epson TM-T88V-i

79
Chapter 3 Application Development Information
3
Wireless Setting
You can make settings for a wireless LAN network when the optional wireless LAN cable set (OT-
WL01) is used.
Item Description
Network Mode Sets the communication mode.
SSID Sets the SSID.
Ad-Hoc Channel Sets the ad-hoc channel. (Available only in the ad-hoc mode)
Communication Standard Sets the communication standard.
Authentication Method Sets the authentication algorithm.
Security Mode Sets the encryption algorithm.
Default WEP Key Sets the WEP key to use.
WEP Key 1 Sets the WEP key 1 when [Security mode] is set to [WEP].
WEP Key 2 Sets the WEP key 2 when [Security mode] is set to [WEP].
WEP Key 3 Sets the WEP key 3 when [Security mode] is set to [WEP].
WEP Key 4 Sets the WEP key 4 when [Security mode] is set to [WEP].
WPA/WPA2 Pre-Shared Key Enter the pass phrase of the pre-shared key when [Security mode] is set to
"WPA" or "WPA2".
Submit Submits settings to the TM-T88V-i.
 Initially, Authentication Method is set to Open System and Security Mode is set to None with
the TM-i firmware Ver.2.0 or later. To ensure security, be sure to change the settings before
use.
 The following restrictions apply to the characters that can be specified for SSID, WEP keys,
and WPA/WPA2 pre-shared keys.
 Before TM-i firmware Ver.3.0: English alphanumeric only
 TM-i firmware Ver.3.0 or later: ASCII characters, excluding spaces