15
Chapter 1 Product Overview
1
Part Names and Functions
Power Switch
Turns the product on or off. The marks on the switch: ( : OFF/ : ON)
Power Switch Cover
Install the power switch cover that comes with the TM-T88V-i onto the product to prevent
inadvertent changing of the power switch, to prevent tampering, and to improve the appearance of
the product.
To operate the power switch, insert an object with a pointed tip such as a ballpoint pen into the hole
on
the power switch cover.
CAUTION
Before turning on the product, be sure to check that the AC adapter is connected to the
power supply.
After the product is turned on, it requires about 30 seconds until it is ready to print.
WARNING
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
Continued use of the product may cause fire or electric shock.
Roll paper cover
Control panel
Cover open button
Power switch
Cutter cover
Power switch cover
Connector
cover
Manual cutter
To Next Page
Loading...
