Epson TM-T88V-i

70
EPSON TMNet WebConfig
EPSON TMNet WebConfig is a Utility to set the product on a web browser.
This section describes EPSON TMNet WebConfig using Internet Explorer as a browser.
The screenshots for TM-i firmware Ver.3.0 are used for explanation, which may be different
depending on the product model being used.
Starting EPSON TMNet WebConfig
Follow the steps below to start up EPSON TMNet WebConfig.
1
Start up a PC connected to the network.
2
Start up the web browser, and input the following.
http://TM-i's IP address/PrinterConfigurationPage/
EPSON TMNet WebConfig starts.
Help Screen Display
Click [Help] to display the help screen for EPSON TMNet WebConfig.
Version Screen Display
Click [About] to display the version screen for EPSON TMNet WebConfig.
 For the product’s IP address, see the status sheet. For the status sheet, see "Con-
firming with a status sheet" on page 54.
 A user name and a password will be required on the authentication screen. Enter
“epson” for both the user name and the password. You can change the password on
the [Password Setting] screen (see "Password Setting" on page 87.).