Epson TM-T88V-i

94
NV Graphics Print Mode
You can confirm the following information by running NV graphics print mode:
• Capacity of the NV graphics
•Used amount of the NV graphics
•Unused capacity of the NV graphics
•Number of NV graphics that are registered
•Key code, number of dots in X direction, number of dots in Y direction, number of colors to be
def
ined.
•NV graphics data
Follow the steps below.
1
Close the roll paper cover.
2
While pressing the Feed button, turn on the product. (Keep pressing the
Feed button until the printer starts printing.)
After the product status is printed, the self-test printing continuance guidance is printed and
Paper LED flashes.
3
Hold down the Feed button for 1 second or more to move to mode
selection.
The mode selection guidance is printed and Paper LED flashes.
4
Press the Feed button for less than 1 second and then hold down for more
than 1 second to print the NV graphics information.
After the information is printed, the mode selection guidance is printed again.
5
To exit, turn off the product or select "Exit and Reboot Printer".
For detailed information about NV graphics, see "NV Graphics Memory" on page 24.
“Select Modes by pressing Feed Button.
Continue SELF-TEST : Less than 1 second
Mode Selection : 1 second or more”