Epson TM-T88V-i

49
Chapter 2 Setup
2
Setting the Memory Switches (Customized Value)
With the “memory switch (customized value),” a software switch for this product, you can set the
functions shown in the table below.
The memory switches (customized value) are already set. Change the setting if necessary.
To change the memory switch settings, use the software setting mode or the TM-T88V Utility. The
settings tha
t can be changed with each of these are shown below.
Function Software Setting Mode TM-T88V Utility
Paper width
✔✔
Print density
✔✔
Multiple Tone print density
✔✔
Print speed
✔✔
Font
 Code page
 International character set
 Font A/B replacement
✔✔
Optional Buzzer
✔✔
Number of head energizing parts
✔ -
Power supply unit capacity
✔✔
Automatic paper cut
✔✔
Paper reduction
 Upper space reduction
 Lower space reduction
 Line space reduction rate
 Line feed reduction rate
 Barcode height reduction rate
✔✔
 To directly configure the product in the software setting mode, see "Memory Switch Setting
Mode" on page 96.
 For detailed information about the TM-T88V Utility, see the TM-T88V Utility User’s Manual.