24
NV Memory
The product's NV memory (Nonvolatile Memory) stores data even after the product power is turned
off. NV memory contains the following memory areas for the user:
•NV graphics memory
•Memory switches (customized value)
•R/E (Receipt Enhancement)
•Maintenance counter
NV Graphics Memory
Graphics, such as shop logos to be printed on receipts, can be stored.
Use the TM-T88V Utility to register graphics.
To check the registered graphics, select [Operation Check] - [Print Logo] in TM-T88V Utility.
Memory Switches (Customized Value)
With the memory switches (customized value), which are software switches for the product, you can
set paper width, print density, font, power supply unit capacity, automatic paper cut, and paper
reduction. See "Setting the Memory Switches (Customized Value)" on page 49.
R/E (Receipt Enhancement)
Graphics, such as shop logos can be printed on top or bottom of receipts by setting R/E (Receipt
Enhancement). For detail, refer to the TM-T88V Utility UserÅfs Manual.
Maintenance Counter
With this function, product information, such as the number of line feeds, the number of autocuts,
and product operation time after the product starts working, is automatically stored in NV memory.
You can read the information with the TM-T88V Utility or in a self-tes
t to use it for periodical checks
or part replacement.
CAUTION
As a guide, NV memory rewriting should be 10 times or less a day when you program
applications.
For detailed information about the TM-T88V Utility, see the TM-T88V Utility User’s
Manual.
For information about how to use the NV graphics memory print mode, see "NV
Graphics Print Mode" on page 94.
To Next Page
Loading...
