107
Appendix
Appendix
Product Specifications
80 mm width paper printing 58 mm width paper printing
Printing method Thermal line printing
Cutting method Partial cut (cutting with one point in left edge left uncut)
Roll paper (single-ply) width 79.5 ± 0.5 mm (3.13 ± 0.02") 57.5 ± 0.5 mm (2.26 ± 0.02")
Interfaces USB host port Standards: USB2.0 (High/Full/Low speed)
No. of ports: 5 ports
Connector: Type A x 4, Micro-USB (Type Micro-AB) x 1
USB device port Standards: USB2.0 (High/Full/Low speed)
No. of ports: 1 port (shared with the host port)
Connector: Micro-AB
microSD card No. of slots: 1 slot
Connector: Push - Push type
Make sure that the product power is turned off before inserting or
removing a microSD card.
Use a microSD card with wear leveling.
Ethernet 10Base-T/100Base-TX
Wireless LAN * IEEE802.11b/g/n
Drawer kick Pin: 6 pin
Connector: Modular
(only for cash drawer or optional external buzzer)
Buffers Receive buffer 4 KB/45 bytes (selectable using DIP switch 1-2)
Downloaded buffer 12 KB (downloaded images)
NV graphics data 256 KB
Barcode/two-dimensional
symbol/printing
JAN 8 (EAN 8), JAN 13 (EAN 13),UPC-A, UPC-E,CODE 39,ITF,
CODABAR (NW-7),CODE 93,CODE 128,PDF417, QR CODE, PDF417,
MaxiCode, GS1-128, GS1 DataBar Omnidirectional,
GS1 DataBar Truncated, GS1 DataBar Stacked,
GS1 DataBar Stacked Omnidirectional, GS1 DataBar Limited,
GS1 DataBar Expanded, GS1 DataBar Expanded Stacked
Power supply AC adapter,RA (Model: M266A)
To Next Page
Loading...
