103
Chapter 4 Handling
4
Removing Jammed Paper
When a paper jam occurs, never pull out the paper forcibly. Open the roll paper cover and remove
the jammed paper.
When the roll paper cover cannot be opened, follow the steps below to remove the jammed paper.
1
Turn off the product.
2
Slide the cutter cover toward the front to open it.
3
Turn the knob until you see a triangle in the opening.
This returns the cutter blade t o the normal position. There is a label near the cutter to assist
you.
4
Close the cutter cover.
5
Open the roll paper cover and remove the jammed paper.
CAUTION
Do not touch the thermal head (See "Cleaning the Thermal Head" on page 104.) because it
can be very hot after printing.