Epson TM-T88V-i

90
Status Sheet
Make sure the product is turned on, press the push button at the interface part for approximately 3
seconds. When you release the button , a status sheet on which network parameters are printed will
be ejected.
With the status sheet, you can check the network settings.
Press the push b
utton with a thin object such as a tweezers.
Information on a status sheet
If you keep pressing the button for more than 10 seconds, the network settings are initialized.
Item Description
General Information
Shows the product’s TM-i firmware version, product’s
name, and time.
Software Shows the product’s TM-i Firmware version.
Model Shows “TM-T88V-i”.
Time Shows the present time and time difference
Wired Shows wired LAN settings.
MAC Address Shows the MAC address.
Link Speed & Duplex Shows the speed of data link layer.
<General Information>
Software
X.XX
Model
TM-T88V-i
Time
yyyy-mm-dd hh:nn:ss
GMT+hh:nn
<Web Contents Update>
Use Automatic Update
No
Date of Installed Web Contents
yyyy-mm-dd hh:nn:ss
Date of Last Automatic Update
yyyy-mm-dd hh:nn:ss
Status of Last Automatic Update
Not update automatically yet
-----------------------------------------
-----------------------------------------