45
Chapter 2 Setup
2
Connecting the AC Adapter
Use AC adapter,RA as the power supply unit for this product.
Connecting AC adapter,RA
Make sure the product’s power supply is turned off, and then connect the AC adapter,RA and power
code.
WARNING
Be sure to use the included AC adapter as the power supply unit.
Using a nonstandard power supply can result in electric shock and fire.
Should a fault ever occur in the included AC adapter, immediately turn off the power
to the product and unplug the power supply cable from the wall socket.
Be sure to unplug the power supply unit’s cable from the wall socket whenever
connecting or disconnecting the power supply unit to the product.
Failure to do so may result in damage to the power supply unit or the product.
Make sure the wall socket power supply satisfies the rated voltage requirements of
the power supply unit. Never insert the power supply cable plug into a socket that
does not meet the rated voltage requirements of the power supply unit.
Doing so may result in damage to both the power supply and the product.
When installing the DC 5 V cable through the cable exits on the back, fix the cables with the
cable band to prevent the cables from coming off. (See "Attaching the Connector Cover" on
page 46.)
To Next Page
Loading...
