Epson TM-U220-i Technical Reference Guide

39
Chapter 2 Setup
2
Installing the brackets
1
Turn the printer over and then put it on a packing box as a platform
horizontally.
2
Attach the upper bracket to the holes numbered “2” and the lower bracket
to the holes numbered “1”using the screws (3×6).
Fou r different sets of screw holes are found on each bracket. Each hole is identified by a
number; be sure to use the holes indicated in the instructions.
Fold this part inside and insert it into
holes to assemble the package.
2
1

Epson TM-U220-i Specifications

General

Type	POS printer
Color	Yes
Print technology	Dot matrix
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Maximum roll diameter	83 mm
Standard interfaces	Ethernet, Parallel, RS-232, RS-485, USB, Wireless LAN
Serial interface type	RS-232, RS-485
Connectivity technology	Wired & Wireless
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking, AS/NZS 3548 class B
Mean cycles between failures (MCBF)	18000000
Safety	UL, CSA, TÜV (EN60950)
Mean time between failures (MTBF)	180000 h
Product color	Gray

Weight and Dimensions

Depth	248 mm
Width	160 mm
Height	138.5 mm