D
Select Check Fax Connection.
E
Press one of the x Start buttons to print the report.
Note:
If an errors are reported, try the solutions in the report.
Setting Up Fax Features
Setting up speed dial entries
You can create a speed dial list allowing you to select fax recipient numbers quickly when faxing. Up to 60 combined
speed dial and group dial entries can be registered.
Follow the instructions below to create a speed dial list. Use the l, r, u, or d buttons to change the LCD screen view to
find the menu, setting item, or option you want to enter.
A
Enter K Fax mode.
B
Enter the x Menu.
C
Select Speed Dial Setup.
D
Select Create. You see the available speed dial entry numbers.
E
Press u or d to select the speed dial entry number that you want to register. You can register up to 60 entries.
F
Press OK.
G
Use the numeric keypad with other buttons on the control panel to enter a phone number. You can enter up to
64 digits.
Note for WP-4540/WP-4545:
To separate phone numbers, enter a space by pressing
.
Note for WP-4521/WP-4525/WP-4530/WP-4531/WP-4535/WP-4590/WP-4595:
To separate phone numbers, enter a space by pressing r.
H
Press OK.
WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595 User’s Guide
Faxing
102
To Next Page
Loading...
