❏ Make sure the printable side (the whiter or glossier side) of the paper is facing in the right direction.
& “Loading Paper” on page 27
❏ When you select Standard Quality or Best as the Quality setting, select Off as the Bidirectional setting.
Bidirectional printing decreases print quality.
❏ Perform a nozzle check first and then clean the print head that shows a defect in the nozzle check result.
& “Checking the Print Head Nozzles” on page 137 and “Cleaning the Print Head” on page 138
❏ For best results, use up ink cartridge within six months of opening the package.
& “Replacing an ink cartridge” on page 133
Your print is grainy
❏ Align the print head. If a quality is not improved, try aligning using the printer driver utility.
& “Aligning the Print Head” on page 141
You see incorrect or missing colors
❏ Perform a nozzle check first and then clean the print head that shows a defect in the nozzle check result.
& “Checking the Print Head Nozzles” on page 137 and “Cleaning the Print Head” on page 138
❏ For best results, use up ink cartridge within six months of opening the package.
& “Replacing an ink cartridge” on page 133
The image size or position is incorrect
❏ Make sure you selected the correct Paper Size, Layout, Expansion, and Reduce/Enlarge setting for the loaded
paper.
& “Copy mode menu list” on page 121
❏ Make sure you loaded paper and placed the original correctly.
& “Loading Paper” on page 27 and “Placing Originals” on page 35
❏ If the edges of the copy or photo are cropped off, move the original slightly away from the corner.
❏ Clean the document glass.
& “Cleaning the exterior of the printer” on page 146
WP-4511/4515/4521/4525/4530/4531/4535/4540/4545/4590/4595 User’s Guide
Troubleshooting for Copying
182
To Next Page
Loading...
